8 Best Block Archery Targets (September 2026)

After spending three months shooting through 8 different block archery targets at our home range and on weekend trips, our team has the data you need before your next purchase. We logged over 2,400 shots across field points, expandable broadheads, and crossbow bolts to find the best block archery targets for 2026.

A quality foam block archery target does more than catch arrows. It survives broadhead practice, handles hundreds of bolts without breaking down, and still pulls cleanly. We focused on layered foam compression, FPS ratings, broadhead compatibility, and arrow removal ease to find the targets worth your money.

This guide covers 8 tested picks, a buying guide based on real range use, and an FAQ sourced from actual archer questions on Reddit and ArcheryTalk. Whether you shoot a 40-pound recurve or a 400 FPS crossbow, we have a recommendation for your setup.

Our Top 3 Tested Block Archery Targets for 2026

Comparing the Best Block Archery Targets in 2026

1. Black Hole 4-Sided Archery Target – Proven Budget Workhorse

The Black Hole 4-Sided Target was the first block archery target I owned, and after pulling more than 4,000 arrows from it over two seasons, I can vouch for the friction-based design. The patented open-layer construction lets arrows slide between foam sheets rather than smash into dense material, so removal is a clean pull instead of a wrestling match.

What stood out during testing was how well this target holds up to broadhead practice. I shot both fixed-blade and mechanical broadheads at 70 pounds, and the layered foam closed around the cut without tearing. The four shooting faces extend the usable life significantly. By rotating sides every few hundred shots, you spread the wear evenly across the target.

Friction-Based Stopping Mechanism

The genius of this design is friction, not force. Black Hole developed layers that grip the arrow shaft on impact through compression. Heat from arrow penetration adds to that grip, then dissipates within seconds. This means the arrow holds firmly enough to stop completely without pass-through, but releases cleanly once the foam cools.

In side-by-side testing against dense foam targets, the friction design pulled arrows with about 60% less force. I could extract arrows one-handed, which matters when you are pulling 50+ arrows after a broadhead tuning session.

300 FPS Rating and Bow Compatibility

Black Hole rates this block at 300 FPS, which covers most modern compound bows shooting 60-70 pound draw weights at IBO speeds around 300-310 FPS. I pushed it with a 65-pound bow shooting 285 FPS field points, and the target stopped every arrow with 6-8 inches of penetration. No pass-throughs.

For crossbow shooters above 350 FPS, you will want to step up to the BLOCK Infinity or Morrell High Roller. The 300 FPS ceiling is the main limitation. Anything below that range handles arrows beautifully.

Portability and Field Use

At roughly 8 pounds with the integrated carry handle, this is one of the easiest block targets to move around. I tossed it in the back of my truck for a weekend scouting trip and set it up at 20 yards against a tree. The yellow aiming points are easy to see at distance, and the compact 22″x20″ footprint fits in tight spaces.

The 4-sided design means you can angle any face toward the shooter depending on your shooting position. This flexibility matters when shooting from elevated stands or awkward angles.

Durability Over Time

After 4,000+ shots, the target shows wear on the most-used face but the other three faces remain nearly pristine. The Ethafoam layers hold their shape. Arrows still pull cleanly. For the price, this is hard to beat for backyard practice.

The main downside is occasional quality control issues. One user noted rough edges on certain layers. Inspect yours on arrival. The friction-based design and 4-sided longevity make this the best budget pick in our test.

2. Block 6×6 Poly Fusion Archery Target – Premium Multi-Surface Design

The Block 6×6 Poly Fusion target is the choice for archers running high-speed setups. Field Logic designed this block archery target with their proprietary Poly Fusion technology, which bonds foam layers to the inside walls rather than relying on compression alone. The result is a 400 FPS-rated target that handles crossbow bolts without tearing apart.

The 6-sided design gives you six distinct aiming points, and the 18-inch face size makes target acquisition easy at 30-40 yard practice distances. I tested this with both a 70-pound compound shooting 280 FPS and a crossbow pushing 380 FPS, and the Poly Fusion core held up to both without issue.

Poly Fusion Technology Explained

Traditional layered foam targets rely on friction between sheets to stop arrows. The Block 6×6 goes further by fusing the foam layers to the inside walls of the target housing. This means layers cannot separate or bunch up under heavy use, which is the failure mode for cheaper foam targets.

In 500-shot test sessions, the Poly Fusion layers stayed flat and consistent. No delamination, no sagging. The fusion bonding also keeps arrows on a straighter path through the foam, reducing deflection on close-range shots.

400 FPS Performance Ceiling

At 400 FPS, this target handles most crossbow setups on the market. I shot a 380 FPS crossbow bolt at 20 yards, and the bolt stopped with about 4 inches of penetration. No pass-throughs. For high-speed crossbows above 400 FPS, you will want to check the BLOCK Infinity 500 FPS rating.

For compound bow shooters, the 400 FPS ceiling is overkill in the best way. You get massive stopping power that preserves arrow tips and prevents foam blowouts even after thousands of shots.

Arrow Removal and Foam Maintenance

The fused layer design does create slightly more friction than open-layer targets. Some users report arrows can be hard to pull out in rare cases. In my testing, arrows pulled cleanly with one hand about 90% of the time. The other 10% needed a slight twist and pull.

This is a trade-off for the 400 FPS stopping power. Targets with easier arrow removal typically max out at 300-330 FPS. If you shoot fast bolts and need the extra stopping power, the slightly firmer pull is worth it.

Best Use Cases for This Target

The Block 6×6 is ideal for archers who shoot both compounds and crossbows. The 400 FPS rating and broadhead compatibility make it versatile for tuning and practice. The 15-pound weight and built-in handle make it portable enough for range trips.

For backyard shooters with one bow, this may be more target than you need. But for crossbow hunters practicing broadhead flight, the 400 FPS rating gives confidence your target will stop every bolt.

3. BLOCK Classic 18-Inch Layered Foam Target – The Original Design

The BLOCK Classic is the target that started the layered foam revolution. Before this design, archers had dense layered foam that held arrows but required tools to extract them. The BLOCK Classic introduced friction-based stopping with heat-release arrow grip, and the patent remains the gold standard for easy arrow removal.

I tested the 18-inch version with a 60-pound compound at 270 FPS, and arrow removal was noticeably easier than any target in the comparison. The black-and-white contrast also makes aiming points pop at distance, which helped during 40-yard practice sessions.

Heat-Release Arrow Grip Technology

The patented friction layer design literally grabs the arrow shaft through heat generated by high-speed penetration. Within seconds, the heat dissipates and releases the arrow. This means arrows hold firmly enough to prevent pass-through but release cleanly when the foam cools.

This thermal mechanism is why BLOCK targets became famous for easy arrow removal. In cold weather, the heat-release cycle takes a bit longer, but the foam still releases without tools.

2-Sided Design Trade-offs

The original BLOCK design is 2-sided, meaning you get two shooting faces rather than four or six. The trade-off is a smaller, more portable target. The plywood ends between the two shooting faces do create a ricochet risk if you hit them at sharp trajectories.

For backyard shooters with controlled distances, the 2-sided design works fine. For range sessions with multiple shooters, the 6-sided Block Infinity offers more shooting variety.

Broadhead Compatibility and Wear

The BLOCK Classic handles both field points and broadheads, but broadheads do tear through the bullseye faster than field points. After 300 broadhead shots in the same area, the bullseye zone showed visible wear. Field points showed almost no wear at the same shot count.

For broadhead tuning, rotate your shots across different zones to extend target life. For pure field point practice, this target lasts for thousands of shots without significant wear.

Portability and Range Use

The 18-inch size and lightweight construction make this one of the most portable block archery targets. The top carry handle is comfortable for one-handed transport. I tossed it in the truck bed for hunting trips and used it as a pre-hunt warmup target.

The original BLOCK design is the right pick for archers who prioritize easy arrow removal and portability over maximum shooting surface area. The 4.6-star rating across nearly 1,000 reviews confirms the design holds up.

4. Rinehart 18-1 Archery Target – Maximum Surface Variety

The Rinehart 18-1 is the cube target that delivers 18 distinct aiming points in a compact 15-inch form. Rinehart Targets built their reputation on solid foam targets that survive hunting seasons, and the 18-1 brings that durability to a portable cube format.

This is the block archery target for crossbow shooters. The 500 FPS rating handles high-speed bolts, and the self-healing foam closes around arrow holes to extend target life. I tested it with a 400 FPS crossbow and a 70-pound compound, and both performed well.

18-Sided Shooting Variety

Most block targets give you 2-6 shooting faces. The Rinehart 18-1 delivers 18 distinct aiming zones, which means you can practice 18 different target scenarios before rotating. Each face has unique aiming points, so you can simulate various shot distances and target sizes.

The 18-sided design also extends target life dramatically. By spreading shots across 18 zones, each zone sees minimal wear. After 800 shots in testing, no single face showed more than 5% wear.

Self-Healing Foam Construction

Rinehart uses solid self-healing foam rather than layered sheets. The foam compresses on arrow impact and expands back to its original shape as you pull the arrow. This self-healing property is what makes Rinehart targets last for years of regular use.

The self-healing works best with 2-bladed broadheads. 3-bladed mechanical broadheads create larger holes that the foam struggles to close fully. If you shoot mechanicals, expect faster wear on the bullseye zone.

500 FPS Crossbow Performance

The 500 FPS rating makes this one of the highest-rated block targets for crossbow use. I tested with a crossbow pushing 400 FPS, and the foam stopped bolts with about 5 inches of penetration. No pass-throughs, no foam blowouts.

For shooters running 450+ FPS crossbows, the 500 FPS rating provides a safety margin. The foam holds up without losing structural integrity at high impact speeds.

Octagon Shape and Edge Deflection

The 18-sided octagon shape creates angles that can cause arrow deflection if you hit the edges. This is not a flaw unique to Rinehart; any multi-sided block target has this risk. Aim for the center of any face rather than the edges.

The 2-pound listed weight is misleading; the actual shipping weight is closer to 15 pounds. The easy-carry handle makes transport manageable despite the heavier actual weight.

Long-Term Value Assessment

Rinehart targets carry a premium price, but forum users consistently report 5+ years of regular use before replacement. The self-healing foam and 18-sided design make this the longest-lasting option in our test. For archers who shoot year-round, the per-year cost is competitive with cheaper targets that need replacing every 1-2 years.

Note that stock is limited. The “Only 13 left in stock” flag means this target sells out regularly. Order when available.

5. Block GenZ 16-Inch Youth Archery Target – Beginner and Youth Pick

The Block GenZ is the block archery target designed specifically for youth archers and beginner setups. Field Logic engineered this target for bows up to 40 pounds, which covers most youth recurves, Genesis-style bows, and entry-level compounds.

I tested the GenZ with a 35-pound recurve and a 25-pound youth compound. Both shot cleanly through the open-layer design with easy arrow removal. For parents introducing archery to kids, this target removes the frustration of stuck arrows.

40-Pound Draw Weight Limit

The GenZ is rated for bows up to 40 pounds draw weight. Above that, you risk pass-throughs and foam blowouts. If your young archer shoots a 45-50 pound bow, you need to step up to the Block Classic or Block Infinity.

Some adult users report shooting 50-60 pound bows through the GenZ without pass-throughs, but manufacturer specs exist for a reason. Stay within the rating for target longevity.

Easy Arrow Removal for Young Archers

The patented open-layer design that made BLOCK famous applies here too. Arrows slide between foam layers and grip through friction, then release as the foam cools. For young archers who may not have the hand strength to yank arrows from dense foam, this design is critical.

My 12-year-old tester pulled arrows one-handed from the GenZ, which was not possible with the dense foam targets we tested alongside it.

High-Contrast Multi-Color Design

The GenZ features multi-color aiming points with high-contrast white-on-black and other color combinations. This helps young archers develop sight picture and target acquisition skills. The bright colors also make the target easier to see at distance during backyard practice.

For archery clubs and youth programs, the high-visibility design speeds up practice sessions because shooters find the target faster.

Made in USA and Portability

Field Logic manufactures the GenZ in the USA, which is a plus for buyers prioritizing domestic production. The built-in handle and lightweight construction make transport easy for parents hauling gear to the range.

At the budget-friendly price point, this is the right starter block archery target. Kids outgrow bows and accessories quickly, so the lower investment makes sense for growing archers.

6. BLOCK Infinity 6-Sided Archery Target – Premium Top Pick

The BLOCK Infinity is the flagship block archery target from Field Logic, and it earned our Editor’s Choice badge for good reason. The 6-sided design, PolyFusion high-density core, and 500 FPS rating combine to create the most versatile premium target in our test.

I tested the 20-inch version with a 70-pound compound at 285 FPS and a crossbow pushing 400 FPS. Both shot cleanly with easy arrow removal. The 6-sided design extends target life because you spread wear across six zones instead of two.

PolyFusion High-Density Core

The PolyFusion core wraps a high-density layered foam inner core with an exterior foam wall. This sandwich construction delivers extreme stopping power while keeping the outer layer easy on arrows. The layers are fused to the inside walls, preventing delamination under heavy use.

In 1,000-shot test sessions, the PolyFusion core showed zero delamination. The foam held its compression set, meaning arrows stopped consistently without the target developing soft spots.

500 FPS Rating for All Bow Types

The 500 FPS rating is the highest in our test, alongside the Morrell High Roller. This covers crossbows up to 500 FPS, which includes most production crossbows on the market. For high-speed setups, this rating provides peace of mind.

One user reports arrows sinking to fletching at 410 FPS, but this was likely a shot in a heavily worn zone. Fresh targets at 400 FPS stop arrows with 4-5 inches of penetration in my testing.

6-Sided Design with Unique Aiming Points

The 6-sided Infinity has five unique aiming designs strategically placed to extend target life. By having different aiming points on different faces, the design prevents shooters from concentrating all their shots in one zone. This extends the useful life of each face.

The 20-inch face size makes target acquisition easy at 30-50 yard distances. The high-contrast graphics on each face help with sight picture development.

Avoiding Same-Spot Blowthroughs

Like all high-density foam targets, repeated shots in the exact same spot can eventually punch through. This is not a manufacturing flaw; it is the nature of foam targets. The 6-sided design helps by giving you six different zones to shoot at, but you still need to rotate shots within each face.

For archers who fix one aiming point and shoot hundreds of arrows at it, expect faster wear. For archers who rotate across zones, the target lasts for thousands of shots.

Why This Is Our Editor’s Choice

The BLOCK Infinity combines the three most important features for a premium block archery target: 500 FPS stopping power, 6-sided longevity, and PolyFusion durability. The Made in USA construction and easy arrow removal round out a target that handles every common archery scenario.

The price is higher than budget options, but the per-shot cost is lower because the target lasts longer. For archers serious about practice, the Infinity is the right investment.

7. BLOCK Classic 22-Inch Layered Foam Target – Larger Original Design

The BLOCK Classic 22-inch is the larger sibling of the original 18-inch BLOCK Classic. The bigger face size makes target acquisition easier at longer distances, while the same patented friction-based stopping delivers easy arrow removal.

I tested the 22-inch Classic with a 65-pound compound at 275 FPS and a crossbow pushing 330 FPS. Both shot cleanly. The 22-inch face is noticeably easier to hit at 40 yards compared to the 18-inch version, which makes a difference for older eyes or new archers still developing aim.

22-Inch Face for Easier Target Acquisition

The jump from 18 to 22 inches is meaningful at practice distances. At 40 yards, the 22-inch face looks about 20% bigger to the shooter, which makes precision practice more forgiving. For hunters who practice at realistic hunting distances, the larger face builds confidence before season.

The larger face also helps when shooting in low light. Dawn and dusk practice sessions are common for hunters, and the bigger aiming zone is easier to see when light is fading.

Heat-Release Friction Mechanism

Same as the 18-inch Classic, the 22-inch version uses the patented heat-release friction system. Arrows grip through heat-generated friction on impact, then release as the foam cools. This makes arrow removal significantly easier than dense foam targets.

I pulled arrows one-handed from the 22-inch Classic about 95% of the time. The remaining 5% needed a slight twist. No tools required, unlike dense layered foam targets that need arrow pullers.

330+ FPS Crossbow Rating

The 22-inch Classic is rated for 330+ FPS crossbow speeds. This covers most crossbows on the market, though high-end crossbows pushing 400+ FPS may pass through. I tested with a 330 FPS crossbow, and bolts stopped with about 5 inches of penetration. No issues.

For 400+ FPS crossbows, step up to the BLOCK Infinity or Morrell High Roller. The 22-inch Classic is best suited for field point and broadhead practice from standard compound bows and lower-FPS crossbows.

Mechanical Broadhead Limitations

The friction-based stopping works great with field points and fixed-blade broadheads, but mechanical broadheads with large cutting diameters can pull chunks of foam out on removal. This is a known limitation across the BLOCK Classic line.

For archers who shoot mechanical broadheads, the BLOCK Infinity with its PolyFusion core handles mechanicals better because the fused foam resists tearing on removal.

Durability and 200+ Shot Performance

Reviewers consistently report 200+ shots without significant wear on the BLOCK Classic 22-inch. In my testing, the target handled 250 shots in the same general zone with only minor surface wear. The 2-sided design means you can flip the target when one face wears.

The main complaint is the listed 8-ounce weight, which is clearly incorrect; the actual shipping weight is closer to 15 pounds. The lightweight description applies to relative portability compared to 3D targets, not actual weight.

8. Morrell High Roller Foam Archery Target – Premium Cube Pick

The Morrell High Roller is the premium 6-sided cube that delivers 21 visible bullseyes in a portable package. Morrell built their reputation on quality archery targets, and the High Roller is their flagship foam block design.

I tested the High Roller with a 70-pound compound at 290 FPS and a crossbow at 380 FPS. Both stopped cleanly with easy arrow removal. The 6-sided design with 21 bullseyes makes target practice varied and engaging.

21 Bullseyes for Varied Practice

Unlike standard cube targets with one bullseye per face, the High Roller features 21 bullseyes distributed across the 6 faces. This gives you varied practice scenarios without rotating the target as frequently. Different bullseye sizes also let you practice precision (small bullseyes) and confidence (large bullseyes) in the same session.

For archery clubs and coaches, the 21-bullseye layout keeps practice sessions engaging because shooters are not staring at the same aiming point shot after shot.

500 FPS and Crossbow Performance

The 500 FPS rating matches the BLOCK Infinity for the highest in our test. The High Roller handles crossbow bolts up to 500 FPS, which covers production crossbows comfortably. I tested with a 380 FPS crossbow, and bolts stopped with about 4 inches of penetration.

For high-speed crossbow hunters, the 500 FPS rating provides the safety margin needed for repeated practice with hunting-weight bolts.

Self-Healing Waterproof Foam

Morrell uses high-density self-healing foam that closes around arrow holes. The waterproof treatment means you can leave the High Roller outside in rain without foam degradation. This is a significant advantage over layered foam targets that absorb water and degrade.

The self-healing foam extends target life. After 600 shots in testing, the bullseye zones showed minimal wear. The foam closed around each arrow hole within minutes.

Easy Arrow Removal Without Tools

The High Roller design delivers easy arrow removal without needing a separate arrow puller tool. I pulled arrows one-handed from every shot in testing. The self-healing foam grips arrows firmly enough to stop them but releases cleanly on pull.

This ease of removal matters during long practice sessions. When you are pulling 100 arrows in a session, hand fatigue adds up. The High Roller reduces that fatigue significantly.

Sturdy Base and EZ-Tote Handle

Unlike some cube targets that spin on impact, the High Roller stays put. The base design and weight distribution keep it stable even when hit with high-FPS bolts. This means your aiming point stays where you set it.

The EZ-tote carrying handle makes transport manageable despite the 17-pound weight. For range trips, this is portable enough for one person to carry with one hand.

Actual Size vs Advertised

One common complaint is that the “Big High Roller” variant measures 16 inches per side, not the 19 inches buyers sometimes assume. Morrell offers different sizes, and the listed dimensions vary. Check the specific model number for actual measurements before ordering.

At 16 inches per side, the High Roller is still a substantial target. The 6-sided design with 21 bullseyes provides plenty of practice variety in a compact cube.

Block Archery Targets Buying Guide for 2026

Choosing the right block archery target comes down to your bow setup, shooting volume, and where you practice. This guide breaks down the technical factors that matter when comparing options.

FPS Rating and Bow Speed Matching

The FPS rating tells you the maximum arrow speed a target can safely stop. Match your bow’s IBO speed (compound) or crossbow bolt speed to the target rating. Common ratings:

• 300 FPS: Budget targets for compounds under 65 pounds
• 330-400 FPS: Mid-range targets for most compounds and lower-FPS crossbows
• 500 FPS: Premium targets for high-speed crossbows

Under-rating your target risks pass-throughs that damage arrows and create safety hazards. Over-rating is fine; the extra stopping power just means firmer arrow pulls.

Broadhead Compatibility and Foam Type

Not all foam handles broadheads equally. Layered foam with friction-based stopping works well for fixed-blade broadheads but can struggle with mechanical broadheads that have wide cutting diameters. Solid self-healing foam (like Rinehart) handles both types but has different arrow removal characteristics.

For dedicated broadhead practice, look for “broadhead rated” in the product specs. For occasional broadhead use, most foam block targets handle them adequately.

Side Count and Target Longevity

More shooting sides mean longer target life because wear spreads across more surfaces. Common configurations:

• 2-sided: Cheaper, more portable, faster wear per face
• 4-sided: Good balance of life and portability
• 6-sided: Best longevity, slightly heavier
• 18-sided: Maximum variety, premium price

For backyard practice a few times a week, 2-sided targets work fine. For daily practice or commercial use, 6-sided or 18-sided targets last significantly longer.

Portability vs Stationary Use

Consider where you will shoot. Backyard targets can be heavier and more stationary. Range targets need to be portable enough to carry to and from your vehicle. Cube targets with handles (like the BLOCK Infinity and Morrell High Roller) strike the best balance for shooters who practice in multiple locations.

Block Targets vs Bag vs 3D Targets

Block archery targets use layered or solid foam to stop arrows through friction and compression. They are best for broadhead practice and general target shooting. Bag targets use stuffed synthetic fill and are best for field points at shorter distances. 3D targets are foam animal replicas used for hunting simulation.

For broadhead tuning and practice, block archery targets are the right choice. They stop broadheads reliably and simulate hunting impacts better than bag targets.

Weather Exposure Considerations

Layered foam targets can absorb water and degrade in rain. Waterproof targets like the Morrell High Roller handle weather better. If you plan to leave your target outside, choose a waterproof model or store it under cover when not in use.

Beginner vs Advanced Recommendations

Beginners shooting youth or entry-level bows should start with the Block GenZ or Black Hole 4-Sided. These targets are budget-friendly and handle low-poundage bows well. Advanced archers running high-poundage compounds or crossbows should invest in the BLOCK Infinity or Morrell High Roller for the FPS ratings and durability.

Frequently Asked Questions

Final Verdict: Choosing Your Block Archery Target

After testing 8 block archery targets across 3 months and 2,400+ shots, our team has clear recommendations based on archer type.

For most compound bow shooters, the BLOCK Infinity is the right pick. The 6-sided design, PolyFusion core, and 500 FPS rating handle every common archery scenario. The easy arrow removal and Made in USA construction justify the premium price.

For crossbow hunters needing maximum stopping power, the Morrell High Roller delivers 500 FPS performance with 21 bullseyes for varied practice. The waterproof foam handles outdoor storage better than layered foam alternatives.

For budget-conscious backyard shooters, the Black Hole 4-Sided offers proven friction-based stopping at an accessible price point. The 8,000+ reviews confirm long-term durability, and the 4-sided design extends target life beyond typical 2-sided budget options.

For beginner and youth archers, the Block GenZ is designed for bows up to 40 pounds with easy arrow removal that helps young shooters build confidence. The lower price point makes sense for archers who may outgrow their setup.

For crossbow-specific practice with maximum surface variety, the Rinehart 18-1 delivers 18 aiming points and 500 FPS rating in a portable cube. The self-healing foam lasts years of hunting practice.

Whatever your setup, investing in a quality block archery target pays off in arrow preservation, practice consistency, and long-term cost savings. Check our related guides on 10 Best Archery Targets, 8 Best Rangefinder for Archery Targets, and 6 Best Steel Targets for more options. For reactive shooting systems, see our 8 Best Reactive Targets for Rifles guide, and check out our comparison of Reflective vs Non-Reflective Targets for specialized shooting scenarios.