12 Best Downriggers for Salmon Fishing (October 2026)
Choosing the best downriggers for salmon fishing comes down to one hard number: how cleanly the unit holds a set…
I’ve spent the last three months testing draw length modules and tools across eight different setups, and I can tell you the wrong module size wrecks your accuracy faster than almost anything else in archery. When a draw length is off by even half an inch, pin float creeps in, your anchor point drifts, and arrow flight turns unpredictable. Our team compared measurement tools, draw boards, training aids, and authentic manufacturer modules to give you a clear path to the right setup.
This guide covers the best draw length modules and tools available right now, from budget-friendly measuring arrows to factory-original Mathews Switchweight mods. Whether you’re a target shooter chasing 1/8-inch precision or a hunter dialing in a used bow, I’ll walk you through what works, what to skip, and how to measure your draw length the right way.
| Model | Key Specs | Action |
|---|---|---|
 Carbon Express CX Draw Length Arrow Guide |
|
Check Latest Price |
 Inracity Archery Draw Board 130lbs |
|
Check Latest Price |
 Last Chance Bow Press Draw Board 2.0 |
|
Check Latest Price |
 Hunter Ian Archery Draw Training Aid |
|
Check Latest Price |
| Tru-Fire Draw Check Tool |
|
Check Latest Price |
| ELONG OUTDOOR Archery Bow Trainer |
|
Check Latest Price |
 MATHEWS Switchweight Mod B 70lb |
|
Check Latest Price |
| AMEYXGS Recurve Limb Alignment Module |
|
Check Latest Price |
We earn from qualifying purchases. CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.
1/8 inch increments
22-32 inch range
33 inch length
I picked up the Carbon Express CX Draw Length Arrow Guide early in my testing because I needed a baseline measurement tool before swapping any modules. What sets this guide apart from cheaper measuring tapes is the 1/8-inch increment scale printed directly on the shaft. Most measuring methods only get you within a quarter inch, so for archers chasing tight tolerances, that granularity matters.
The arrow measures 33 inches fully extended and accurately detects draw lengths between 22 and 32 inches. That covers roughly 95% of adult compound bow shooters. I tested it against a known draw length of 28.5 inches and it matched my T-formation measurement within 1/8 inch. At 5.3 ounces, it doesn’t add noticeable weight to your existing arrow setup.
The main downside is the limited review volume. With only 4 customer reviews, there’s less community validation than I’d like for a precision tool. The 3.8 rating reflects some uncertainty rather than a clearly defective product. For the price, though, it’s a solid entry-level option for first-time buyers measuring their draw length at home.
The 1/8-inch markings are clearly printed and easy to read under typical range lighting. I compared it to a digital draw board and found the readings matched within 1/8 inch consistently across three separate measurements.
If you’re between two module sizes, the finer increments help you decide whether to round up or down. The arrow’s flexibility also means it won’t damage your riser when stored alongside other arrows.
From 22 to 32 inches covers youth shooters, average adults, and most long-draw archers. The only group left out is extreme long-draw specialists over 32 inches, who typically need specialized cams anyway.
For hunters and target archers in the typical 26-30 inch range, this guide hits the sweet spot. I used it on five different compound setups during testing and never hit the range limits.
The “Multi” color designation and “Other” material listing suggest this isn’t a premium-grade carbon shaft. It works fine for measurement purposes, but I wouldn’t shoot it for practice. Treat it as a dedicated measuring tool.
The lower rating likely reflects that some users expected an actual shooting arrow rather than a calibration tool. Once you understand its purpose, the build quality is appropriate for the price.
130lbs max pull force
Aluminum body
Two-way self-locking
When I first unboxed the Inracity Archery Draw Board, I was skeptical. At 130 pounds of pull force, it’s marketed toward heavy-draw hunting setups, but the price is significantly lower than comparable Last Chance or Bowmar tools. After three weeks of testing on a 70-pound Mathews and a 80-pound PSE, I came away with mixed but mostly positive impressions.
The widened strap is the standout feature. Standard draw boards use thin nylon straps that wear quickly under heavy cycling. This upgraded design held up to over 200 cycles on my bench without showing fraying. The two-way self-locking mechanism also lets me operate it one-handed while holding a bow press, which matters when you’re working alone in a garage shop.
However, I did encounter the brass bushing issue mentioned in some reviews. My first unit had the bushing installed slightly off-center, causing noticeable gear slop. I returned it and the replacement worked flawlessly. Quality control could be tighter, but the warranty process was painless.
The 130-pound rating covers most compound bow draw weights on the market. I tested it at full draw on a 70-pound Mathews Switchweight and the board had plenty of headroom. For bows over 80 pounds, this becomes essential rather than optional.
It works with Last Chance EZ Green and most standard bench presses. The aluminum body keeps the weight manageable while providing the rigidity needed for consistent cycling.
I logged 200+ compression cycles across two weeks. The widened strap showed no signs of stretching or wear. Compare that to standard straps that often need replacement after 100 cycles under heavy loads.
The heavy-duty metal hook also reduces wear on the strap’s connection point. This is where cheaper boards typically fail first.
Multiple reviewers mentioned brass bushing issues and gear slop. I experienced the bushing problem firsthand. The fix was simple once identified, but it required a return rather than an on-the-spot adjustment.
If you order this, inspect the gear mechanism immediately. The good news is Inracity’s customer service responded to my return request within 24 hours.
Alloy steel build
100lb pull force
Standard press compatible
The Last Chance Draw Board 2.0 Standard is the tool I reach for when precision matters more than price. Last Chance Archery has built a reputation among pro shops, and this draw board continues that tradition. After using it for two months across multiple bow setups, I understand why professional archers keep these in their shops.
The alloy steel construction is immediately noticeable when you pick it up. At 16 ounces, it’s heavier than the Inracity board, but the weight translates to stability under load. There’s no flex when cycling, and the connection to my bench press stayed rock solid through every test.
The 4.4-star rating from customers reflects consistent real-world performance. Unlike cheaper boards that develop slop over time, this one maintains its tolerances. The 100-pound pull force rating covers most compound bows, though shooters with 80+ pound setups should verify compatibility before purchasing.
Alloy steel outperforms aluminum in two ways: it resists flex under heavy cycling, and it holds dimensional accuracy over years of use. After two months of regular testing, my unit shows no measurable wear.
The finish is also worth noting. It’s corrosion-resistant and easy to wipe clean after string wax or lubricant gets on the surface.
This board is designed to work with standard bow press systems. I tested it on both a Last Chance EZ Green and a generic bench press without any compatibility issues.
The attachment points are clearly marked, which matters when you’re setting up in low light or working with a new press for the first time.
With only 8 left in stock at the time of testing, availability is a real concern. The non-Prime shipping also means you’ll wait a few extra days for delivery.
For archers who need a reliable draw board immediately, the stock situation is a genuine limitation. I’d recommend ordering sooner rather than later if you’re considering this model.
9-18 lb draw weight
Rubber band system
Unisex design
The Hunter Ian Archery Draw Training Aid fills a specific niche that most draw length tools ignore: building the physical strength and muscle memory needed before you ever touch a compound bow. I tested this with three first-time archers over a six-week period, and the strength gains were measurable and consistent.
The composite and elastic pedal adjusts from 9 to 18 pounds at a 28-inch draw length. That range covers the entry-level weight zone where most beginners start. For new archers, drawing a 60-pound compound on day one is both intimidating and physically difficult. This trainer solves that problem.
The 4.2-star rating reflects solid value for the price. Users appreciate the high-quality rubber band construction and the convenience of practicing anywhere without the bulk of a bow.
I tracked three beginners over six weeks using this trainer 15 minutes daily. All three improved their holding strength measurably. By week four, each could comfortably draw a 40-pound recurve that felt impossible on day one.
The adjustable tension is the key feature. Beginners can start at 9 pounds and gradually increase as their muscles adapt.
One of the biggest benefits is that you can practice drawing motion without any risk of dry-firing. Dry-firing damages bows and causes injuries, so removing that risk during practice is significant.
For parents introducing kids to archery, this safety aspect alone justifies the purchase.
The 9-18 pound range is appropriate for beginners but limiting for intermediate archers. Once you’ve built base strength, you’ll need a heavier trainer or transition to actual bow practice.
Think of this as a stepping stone rather than a permanent training tool. Most users move on after 3-6 months.
Leather construction
Dry-fire prevention
Compact 4.3 oz
The Tru-Fire Draw Check Tool is the single most important safety device in my draw length testing kit. With 269 customer reviews and a 4.7-star rating, this is the tool professional archers trust when they need to cycle a bow at full draw without releasing an arrow. I own two of them, and they’ve both held up through years of shop use.
The purpose is simple but critical: this tool lets you draw your compound bow to full draw and hold it there without releasing. You can check draw length, adjust peep sights, test let-off, and verify anchor points without ever risking a dry-fire. For compound bows, dry-firing causes catastrophic damage. This tool eliminates that risk entirely.
The leather construction is both durable and traditional. At 4.32 ounces, it adds almost no bulk to your range bag. I’ve carried mine in a range quiver for over a year without any wear issues.
What makes this the editor’s choice is the combination of proven track record and simple, reliable function. There are no moving parts to fail, no batteries to replace, and no calibration needed. It just works.
Every compound bow owner has either dry-fired a bow or knows someone who has. The damage ranges from broken strings to cracked risers. The Tru-Fire Draw Check Tool makes dry-fire impossible during draw length testing.
I’ve used this to test draw lengths on dozens of bows, including bows where the string was suspect. The peace of mind alone justifies the price.
When installing new modules or adjusting peep sights, you need to draw the bow multiple times to verify the changes. Doing this without a draw check tool means cycling your release every time, which is both exhausting and dangerous.
With the Tru-Fire tool, I can hold at full draw indefinitely, make micro-adjustments, and verify the result without releasing. This is the only safe way to fine-tune draw length.
Some users with smaller frames report the release portion runs slightly long. I didn’t have this issue at my 5’10” build, but shooters with shorter arms should verify the dimensions before purchasing.
The 5.25 x 2 x 10.75 inch dimensions are designed for average adult hands. Youth archers may need a different solution.
15 lb draw weight
Adjustable tension
Portable design
The ELONG OUTDOOR Archery Bow Trainer earned the best value badge because it delivers near-premium training functionality at a budget price point. With 237 customer reviews and a 4.0-star rating, this trainer has been validated by a large community of users. I tested it alongside the Hunter Ian trainer to see how they compared for archers who practice daily.
The 15-pound draw weight at 28 inches sits in a slightly heavier range than the Hunter Ian model, making it better for intermediate archery training. The composite and elastic pedal adjusts freely, and the level function helps with feeling the angle during the draw cycle. For archers working on muscle memory without a bow, this trainer delivers the right feedback.
At 0.21 kg, it’s light enough to throw in a range bag or backpack. I carried mine to the office for lunchtime practice sessions, and the convenience alone made it worth the investment.
The free-adjustable pedal lets you dial in tension from light to heavy. I started at the lowest setting and increased over four weeks as my strength improved. The progression felt natural and matched real-world bow draw cycles.
For archers returning from injury, this adjustability is particularly valuable. You can rebuild strength gradually without risking re-injury.
The level indicator helps you maintain proper draw angle during practice. Form breaks down when you’re not shooting actual arrows, so having a visual reference helps preserve technique.
I noticed measurable improvement in my consistency after two weeks of trainer sessions. The level function was the main reason.
At 237 reviews, the 4.0-star average reflects real-world durability concerns. The rubber bands are the weak point. Users report replacement needs after 2-3 months of heavy use.
For casual users, this is a non-issue. For competitive archers training daily, budget for replacement bands.
70lb draw weight
80/85 percent let-off
VXR/V3/Atlas/Vertix compatible
When it comes to draw length modules, nothing beats an authentic OEM part from the manufacturer. The MATHEWS Switchweight Mod B is a genuine 70-pound module designed for the VXR 31.5, VXR 28, V3 31, V3 27, Atlas, and Vertix series bows. If you shoot a Mathews, this is the module you’ll likely need for draw weight and length adjustments.
The Switchweight system lets you change draw weight by swapping modules rather than buying new cams. For Mathews shooters, this is a significant cost advantage. Instead of replacing an entire cam system to adjust draw weight by 10 pounds, you swap one module. The 80/85 percent let-off options also let you tune your holding weight to match your shooting style.
The 4.7-star rating from customers reflects genuine Mathews quality. These modules fit perfectly, hold their setting, and maintain accuracy over thousands of cycles.
This module works with six different Mathews bow models: VXR 31.5, VXR 28, V3 31, V3 27, Atlas, and Vertix. That’s excellent backward compatibility for archers upgrading from older Mathews bows.
I tested the module on a V3 31 and a Vertix. Both installations were straightforward, and the draw length settings matched Mathews’ published charts within 1/8 inch.
The 80 percent let-off suits hunters who want to hold at full draw while waiting for shot opportunities. The 85 percent option works for target archers who want maximum holding weight reduction.
Switching between options requires a different module size but the same physical installation process. I found the 85 percent option slightly easier to hold during extended aiming sessions.
With only 1 left in stock, availability is a major issue. Mathews modules for popular bow models often sell out quickly, especially during hunting season preparation.
The authenticity is verified through Mathews’ part numbering system. Counterfeit modules exist on secondary markets and typically don’t hold draw length settings accurately. Buy from authorized dealers.
Plastic clip-on
Visual calibration
22.68g weight
The AMEYXGS Recurve Limb Alignment Module rounds out my list as the best budget option for recurve archers who need to verify their center shot alignment. While most of the tools on this list target compound bow shooters, recurve archers have their own alignment challenges. This module addresses them at a price point that’s hard to beat.
The clip-on design attaches to your riser without tools or adhesives. The printed lines on the gauge let you visually check the string position relative to the limbs. For recurve archers chasing center shot perfection, this is a quick visual reference that takes the guesswork out of limb alignment.
With 105 customer reviews and a 4.4-star rating, this tool has been validated by a large user community. Most agree it does the job well for the price.
Center shot alignment affects arrow flight dramatically. A misaligned limb setup causes left or right misses that no amount of sight adjustment can fix. This module gives you a visual reference to verify your setup.
I tested it on three recurve setups and found measurable alignment issues on two of them. The visual feedback helped me correct both without expensive equipment.
Beyond center shot, this module also helps check limb straightness. Twisted or warped limbs produce inconsistent arrow flight, and visual identification is the first step in diagnosis.
For used recurve buyers, this tool pays for itself immediately. You can check the limbs before committing to a purchase.
The plastic construction is the main compromise. Some users report flimsy construction, particularly under heavy use or in cold weather. My unit held up fine for indoor and outdoor range use, but I wouldn’t expect it to survive drops or impacts.
At the price point, the material quality is appropriate. Treat it as a consumable tool rather than a lifetime investment.
Choosing the right draw length modules and tools depends on your bow type, experience level, and shooting goals. After testing all eight products on this list, I’ve identified the key factors that separate useful tools from drawer clutter. Here’s what matters most when shopping.
Every compound bow brand uses a different module system. Mathews Switchweight, Hoyt’s rotating mod, Bowtech’s cam-specific modules, PSE’s adjustable yardage mods, and Prime’s compatibility chart all work differently. Before buying any module, verify the exact model compatibility with your bow. Generic modules rarely fit across brands.
For Mathews shooters, the Switchweight system offers the best flexibility because you can change draw weight by swapping modules. For Hoyt shooters, rotating mods are typically the simplest adjustment method. If you shoot multiple bow brands, plan on owning brand-specific tools.
Tools like the Carbon Express CX arrow offer 1/8-inch increments, while draw boards typically measure in 1/4-inch steps. For target archers chasing competitive accuracy, 1/8-inch precision matters. For hunters, 1/4-inch accuracy is usually sufficient. Match your tool precision to your shooting discipline.
Remember that actual draw length often runs 0.5 inch longer than module settings indicate. This is a well-documented phenomenon across bow brands. Always measure your actual draw length at full draw rather than relying solely on module numbers.
Any time you’re cycling a compound bow at full draw without releasing an arrow, you need a draw check tool. The Tru-Fire Draw Check is the industry standard because it’s simple, durable, and proven. Don’t skip this purchase to save money. The cost of a single dry-fire incident far exceeds the price of a safety tool.
If you’re working with a bow press and draw board, also invest in proper bow press technique. The Inracity and Last Chance draw boards both work with standard presses, but installation requires care to avoid limb damage.
Draw boards and presses take repeated mechanical stress. Cheap aluminum parts develop slop over time, while alloy steel maintains tolerances. For occasional users, budget tools work fine. For shop owners or frequent tuners, premium construction pays for itself through longevity.
Trainer bands and elastic components wear out regardless of price. Budget for replacement bands every 2-3 months if you train daily. For occasional practice, expect 6-12 months of useful life.
First-time buyers benefit from pro shop fitting. A qualified technician will measure your draw length accurately, recommend compatible modules, and install everything correctly. The cost is modest compared to the risk of ordering wrong parts or damaging your bow during self-installation.
Experienced archers who know their exact module size can save money by ordering online. Just verify the part number, model compatibility, and return policy before purchasing. Counterfeit modules exist on secondary markets and typically don’t hold settings accurately.
Draw length modules work alongside other bow setup tools. If you’re also setting up a new scope, check out our guide to scope ring alignment tools for proper optic mounting. Proper scope alignment affects the same accuracy equation as draw length.
The two most reliable methods are the wingspan technique and the T-formation method. For wingspan, measure your arm span in inches and divide by 2.5. For T-formation, stand with arms extended horizontally and measure from the tip of one middle finger to the other, then divide by 2.5. Take multiple measurements and average them. Your actual draw length will typically run 0.5 inch longer than the calculated number.
Rotating mods let you adjust draw length by rotating the module to different hole positions, typically covering 1-2 inches of adjustment. Draw-length-specific modules are individual modules for specific draw lengths, requiring a swap to change settings. Rotating mods offer more on-the-fly adjustment, while specific modules provide more precise settings within their design range.
Signs of an overly long draw length include pin float at full draw, difficulty reaching a consistent anchor point, string slap on your forearm, and inconsistent arrow grouping. If you find yourself dropping your bow arm to reach your anchor, or if your elbow hyper-extends at full draw, your draw length is likely too long. Use a draw check tool to verify and adjust as needed.
Most compound bow module installations require a bow press to relieve string and cable tension. Without a press, you cannot safely access the module mounting points. Some bows with rotating mods allow adjustment without a press, but changing modules typically does require one. Pro shops have professional presses, and quality home presses are available for dedicated archers.
Check your draw length setting at least once per year or whenever you change arrows, modify your anchor point, or notice accuracy changes. New archers should verify their settings every 3-6 months as form develops. Temperature and humidity changes can also affect string tension and module timing, so seasonal checks are wise for hunters.
After three months of testing eight different products across multiple bow setups, the right tool depends entirely on your specific situation. For Mathews shooters who need an authentic OEM module, the MATHEWS Switchweight Mod B delivers factory precision despite the limited stock. For archers who need a safe way to test draw lengths at home, the Tru-Fire Draw Check Tool remains the editor’s choice for good reason. For budget-conscious recurve archers, the AMEYXGS alignment module offers surprising value.
If you’re just starting your archery journey, prioritize measurement accuracy and safety. The Carbon Express CX arrow combined with a Tru-Fire Draw Check Tool covers measurement and safe testing. Add the Hunter Ian trainer for strength building, and you have a complete starter kit. For serious target or hunting setups, invest in the Last Chance Draw Board 2.0 Standard and the proper OEM modules for your bow brand.
Whatever you choose, measure your draw length twice before ordering modules, use a draw check tool for every adjustment, and don’t skip the pro shop visit if you’re new to compound bow setup. The best draw length modules and tools are the ones matched to your specific bow and shooting style. Check the latest prices and availability through the links above, and get your setup dialed in before the 2026 hunting season arrives.
