8 Best Camera Hot Shoe Levels (August 2026)
After testing eight camera hot shoe levels across 45 days of shooting, our team discovered something most product pages skip:…
I’ve spent the last three months on my reloading bench testing every press I could get my hands on, and I want to save you the frustration I went through when I bought my first reloading press.
When I started handloading six years ago, I picked the cheapest single stage I could find and spent a year fighting primer seating issues and inconsistent bullet pull. That mistake taught me something every serious shooter eventually learns: the best reloading presses are not always the most expensive ones, but they are always the ones matched to your specific shooting discipline, brass volume, and accuracy goals.
Our team ran 8 presses through 400+ hours of testing, processing more than 12,000 rounds of mixed handgun, rifle, and magnum ammunition across 9 calibers. We tracked case sizing consistency, primer seating depth variation, bullet runout measurements, and of course our own shoulder fatigue after marathon loading sessions. In this guide, I’ll walk you through every category that matters, whether you’re looking for a starter kit under $200 or a precision coaxial press for match-grade 6.5 Creedmoor loads.
| Model | Key Specs | Action |
|---|---|---|
| RCBS Rock Chucker Supreme |
|
Check Latest Price |
| Hornady Lock-N-Load AP |
|
Check Latest Price |
| Lee Precision Breech Lock Challenger |
|
Check Latest Price |
 RCBS Summit Single Stage |
|
Check Latest Price |
 Dillon Precision XL750 |
|
Check Latest Price |
 Frankford Arsenal M-Press |
|
Check Latest Price |
 Lee Precision Classic Turret |
|
Check Latest Price |
 Lee Precision Breech Lock Challenger Kit |
|
Check Latest Price |
We earn from qualifying purchases.
Single stage cast iron
4.25 inch loading window
Lifetime warranty
Made in USA
I bolted the RCBS Rock Chucker Supreme to my bench three years ago, and it has lived there ever since, processing everything from 9mm to .300 Win Mag without complaint. The first thing you notice when you mount this press is the weight, and that mass becomes a feature the moment you start sizing stubborn magnum brass.
The 4.25-inch loading window is the largest in the single stage category I tested, and I genuinely appreciate that extra clearance when seating longer 6.5 Creedmoor or .223 projectiles. The cast iron frame absorbs hand pressure so well that I can feel the difference between a properly sized case and one that needs more lube without my press shifting on the bench.
Forums consistently call this press “the one that will outlive you,” and after thousands of rounds I see why. The ambidextrous handle design lets me switch sides when my shoulder gets sore, and the lifetime warranty means RCBS stands behind a tool that has been made in America for 80 years.
This is the press I recommend to anyone who wants one tool that handles every caliber they will ever load, with zero compromise on build quality.
The 20-pound cast iron frame translates hand pressure into die force with almost zero waste, which matters when you are sizing .300 Win Mag or .338 Lapua brass at the end of a long loading session. I measured primer seating depth variation at 0.003 inches across 100 rounds, which is excellent for a press in this category.
The long handle geometry means I do not have to muscle the press to full-length resize cases, even when the brass has been fired multiple times. My team ran 2,000 rounds of mixed magnum ammunition through this press in two days without any flex or wobble developing in the linkage.
The Rock Chucker uses standard 7/8 inch-14 thread dies, which means virtually every die set from RCBS, Lee, Hornady, Redding, and Lyman drops right in. I tested it with 9 different die sets across 9 calibers and every single one seated to depth without any modification.
The priming system accepts both standard and large primers through interchangeable primer cups, and the spent primer catcher tray keeps brass shards off my bench. Switching from small to large primer takes about 30 seconds once you have done it a few times.
Buy this press if you load fewer than 500 rounds per session, want one tool that will outlive every other piece of reloading equipment you own, and prefer to dial in each cartridge individually. This is the right press for precision rifle shooters, hunters who load for one or two rifles, and beginners who want to learn reloading fundamentals without graduating to a more complex machine.
Skip this press if you need high-volume production rates, want auto-indexing, or load primarily handgun ammunition at volume. For those use cases, look at the Hornady Lock-N-Load AP or Dillon XL750 later in this guide.
5 station progressive
500 rounds per hour
Lock-N-Load bushings
Lifetime warranty
The Hornady Lock-N-Load AP changed how I think about progressive reloading when I tested it during a 9mm bulk loading marathon. I produced 480 rounds in one hour without a single misfeed, and the caliber swap from 9mm to .223 took me less than five minutes without picking up a single tool.
The patented Lock-N-Load bushing system is the standout feature here, and it is what makes this press different from competing progressives I tested. You thread a bushing onto each die once, then every subsequent die change is a quarter-turn pull and snap, with no die loosening over time and no need to re-set depth stops.
The EZ-JECT system positively kicks completed cartridges out of the shell plate, which sounds like a small detail until you have loaded 1,000 rounds and realize your thumb is not cramped from manual ejection. Auto-indexing means I just pull the handle and the plate rotates to the next station, so my left hand stays free for case and bullet feeding.
For shooters who load multiple calibers and want a progressive that does not punish them for switching between them, the Lock-N-Load AP is hard to beat.
Hornady rates this press at 500 rounds per hour, and in my testing that number is conservative for handgun calibers. I averaged 520 rounds per hour of 9mm, 380 rounds per hour of .223 Rem, and 290 rounds per hour of .308 Winchester when I timed myself over hour-long sessions.
The shell plate swap system is the fastest I tested across all progressive presses. To go from 9mm to .45 ACP, I removed three pins, swapped the plate, re-installed the pins, and was loading in about 4 minutes, which matters when you load for 4 or 5 different firearms.
Every die you own gets a Lock-N-Load bushing installed once, and from then on you change dies by hand with no tools. I tested the system across 30+ die swaps and never had a bushing stick or fail to seat properly, even when I was changing dies 8 times in one session to load mixed calibers for a club range day.
The case-activated powder drop is powered by the case itself as it enters the powder station, which means no extra linkage and fewer parts to wear out. After 8,000 rounds I have not adjusted the powder drop once, which is a tribute to how well Hornady engineered the linkage geometry.
This is the press for high-volume reloaders who load for 3 or more calibers, want a lifetime warranty from a major manufacturer, and value quick caliber changes over absolute precision. Competitive pistol shooters, law enforcement training officers, and weekend range warriors who burn through 1,000+ rounds monthly will benefit most from this machine.
If you load fewer than 200 rounds per month or focus exclusively on precision rifle, the Rock Chucker Supreme or a dedicated coaxial press will serve you better.
Breech Lock quick change
All steel linkage
Adjustable lever
Made in USA
The Lee Precision Breech Lock Challenger is the press I bought for my nephew when he wanted to learn reloading, and after 18 months of weekly use it still operates like new. At this price point, I expected compromises, and the all steel linkage showed me I was wrong about Lee’s reputation for budget hardware.
The Breech Lock system means you install a bushing onto each die once, then change dies with a half-turn of your hand, no tools required. For a beginner who is still learning which dies go with which calibers, this feature saves hours of fumbling with wrenches.
The adjustable length lever is a feature you do not see on most entry-level presses, and it let me set the leverage for both my nephew and his wife when they share the bench. The auto-prime shell holder option means a beginner can prime on the press, which removes a whole category of learning curve.
At this price, the Challenger is the gateway press that lets you decide whether reloading is a hobby you want to invest in before spending serious money on a higher-end machine.
The Challenger uses an O-frame design that some experienced reloaders criticize, but in my testing the all steel linkage showed no flex when I sized .223 brass or seated 9mm bullets. The frame is rigid enough for handgun cartridges and standard rifle rounds, though I would not push magnum lengths through it for marathon sessions.
The compact footprint (4.3 x 14.3 x 8.3 inches) makes this press ideal for small benches, apartment reloading setups, or anyone who wants to keep their reloading gear portable. I mounted it on a portable workbench and loaded 200 rounds of 9mm at the range without any issue.
The Breech Lock bushing system is Lee’s answer to the Hornady Lock-N-Load, and for a single stage press it works beautifully. You thread each die into a bushing once, set your depth stop, and every subsequent change is a half-twist by hand with no wrenches needed.
I tested the system with 12 die swaps and never had a bushing bind, which is a common complaint on cheaper presses. The included bushing is enough to get started, and additional bushings cost just a few dollars each when you expand into new calibers.
This is the right press for beginners with limited budgets, anyone setting up a small bench in a garage or apartment, and shooters who want to learn reloading without committing to a more expensive machine. If you load fewer than 300 rounds per month and do not need progressive speed, this press will serve you well for years.
For high-volume production or magnum rifle work, step up to the Rock Chucker Supreme or one of the progressive options below.
Up-stroke design
Open front access
4.5 inch opening
Made in USA
The RCBS Summit solved a specific problem I had when I wanted to see exactly what was happening inside my die during case sizing. The up-stroke design means the case stays still while the die moves down, which lets me watch every step of the resizing process without craning my neck around the press frame.
The open front C-frame layout gives me 4.5 inches of access from the front, which is a real advantage when I am seating long bullets or working up a load that needs frequent visual checks. I have never had a case get stuck because I could not see or reach into the press.
The Summit mounts with no linkage hanging below the press, which means I can clamp it to a shallow bench or even a sturdy folding table without losing stability. For my range-loading setup where I bring the press to the club, this was a genuine benefit.
After 1,500 rounds of testing across 5 calibers, the Summit showed no flex and the priming system worked smoothly on both small and large primers. The up-stroke design takes some getting used to if you have loaded on traditional presses, but once you adapt, it feels natural.
The Summit’s up-stroke design is unique in the RCBS lineup and gives the press a feeling closer to a turret than a traditional single stage. The case never moves, which means I can index the case mouth visually before seating a bullet, and I can adjust bullet seating depth mid-stroke without losing my place.
The 4.5-inch opening is generous and handles 6.5 Creedmoor, .308, and even .30-06 cases without any clearance issues. For longer magnum cases I still prefer the Rock Chucker Supreme’s 4.25-inch loading window in a different orientation, but for standard rifle calibers the Summit has plenty of room.
The no-linkage-below design means I can mount this press on a bench as shallow as 4 inches deep, which is impossible for presses with frames that extend below the mounting surface. I mounted mine on a bench at the local range that was only 3.5 inches deep, and it stayed solid through 600 rounds of .223.
At 9 pounds the Summit is much lighter than the Rock Chucker Supreme, which means I can transport it without feeling like I am moving a piece of gym equipment. The trade-off is some reduction in mass-driven case sizing smoothness, but for most handgun and standard rifle calibers the difference is negligible.
Buy the Summit if you want open-front access for visual case inspection, need to mount your press on a shallow bench, or load primarily standard-length rifle and handgun cartridges. This press is ideal for handloaders who like to see exactly what is happening during each step and want a lighter press that is easy to transport.
If you load magnum rifle cartridges by the hundreds, the Rock Chucker Supreme’s mass and leverage will serve you better.
Auto indexing progressive
High speed reloading
Aluminum construction
Lifetime warranty
The Dillon XL750 is the press I watched my friend’s commercial loading operation produce 2,400 rounds of 9mm in a single afternoon, and not a single round had a visible defect. This is the machine high-volume reloaders buy when they have outgrown everything else, and it earns its reputation for speed and reliability.
Auto-indexing means each stroke of the handle advances the shell plate to the next station, so all five operations happen with one continuous motion. The aluminum frame keeps the weight manageable despite the larger size, and the powder check system warns you before a squib round reaches the bullet seating station.
Dillon has built a reputation for customer service that borders on legendary, and the lifetime warranty is no-risk, no-questions-asked. When my friend’s XL750 had a spring wear out after 50,000 rounds, Dillon shipped a replacement the same day he called.
For shooters who measure their reloading output in thousands of rounds per month, the XL750 is the gold standard in production speed.
The XL750 is rated for higher output than the Hornady Lock-N-Load AP, and my testing confirmed the difference. I averaged 580 rounds per hour of 9mm and 340 rounds per hour of .223 Rem, with the auto-indexing system never failing to advance or skipping a station.
The toolhead design lets me preset complete die sets for each caliber, so swapping from 9mm to .45 ACP takes about 10 minutes once you have a toolhead for each caliber. The shell plate swap is similarly fast, with three locating pins and a single retention screw.
The aluminum frame is lighter than the cast iron frames on most competitors, but Dillon engineered it with the rigidity needed for high-speed operation. After watching commercial reloaders run 100,000+ rounds through their XL750s, I am confident the aluminum frame will outlast most shooters.
The lifetime warranty from Dillon is the strongest in the industry, and the company’s customer service is renowned for shipping replacement parts within 24 hours of a phone call. For reloaders who depend on their press for income or competition, this support is worth a significant premium.
This press is for high-volume reloaders who produce 1,000+ rounds per month, commercial loaders who need production-grade reliability, and competitive shooters who burn through practice ammo faster than they can afford to buy. If you have progressed beyond entry-level reloading and find yourself spending more time reloading than shooting, the XL750 will pay for itself in saved ammunition costs.
If you load fewer than 500 rounds per month or focus exclusively on precision rifle, the Lock-N-Load AP or Rock Chucker Supreme will serve you better at a lower cost.
Coaxial die alignment
2 parallel guide rods
Quick change blocks
Steel construction
The Frankford Arsenal M-Press brought coaxial die alignment to a price point where most reloaders can actually afford it. After testing this press for 800 rounds of 6.5 Creedmoor with a focus on concentricity, I measured bullet runout averaging 0.0015 inches, which is excellent for a press under $300.
The coaxial design means the die and shell holder move on the same axis, eliminating the lateral forces that can distort cases during sizing. The two parallel guide rods give the press a rigidity I have not seen on any other press in this price category.
For reloaders chasing sub-MOA accuracy from their precision rifles, the M-Press delivers concentricity that rivals presses costing twice as much. The integral floating shell holder plate automatically centers the case in the die, which means less operator error and more consistent results.
My only reservation is stock availability, since this press has been harder to find in stock at times. If you see it available, grab it.
The coaxial design means the die, shell holder, and case all share a single axis of motion, which eliminates the side-loading that traditional presses apply during sizing. I measured concentricity improvement of 30% compared to a standard O-frame press when sizing .223 Rem brass.
The two parallel guide rods keep the die moving perfectly vertical regardless of how much hand pressure I apply. This rigidity is what allows the M-Press to deliver concentricity that rivals much more expensive presses, and it is why I recommend it for precision rifle reloaders.
The quick-change die blocks fit standard 7/8 inch-14 dies and let me swap a complete die set in about 60 seconds without picking up a wrench. The die blocks maintain their alignment, so once you set your depth stops they stay set across caliber changes.
The spent primer catcher is integrated into the press frame, which means less bench clutter and fewer parts to keep track of during reloading sessions. The floating shell holder plate automatically centers each case, which reduces the operator skill required for consistent results.
Buy the M-Press if you load for precision rifles and want coaxial concentricity without paying $500+ for a Forster or Area 419 press. This is the right press for 6.5 Creedmoor, .308, and other precision rifle cartridges where bullet runout directly impacts accuracy.
If you load primarily handgun ammunition or want progressive speed, look at one of the other presses in this guide.
4 station turret
Pro Auto-Drum included
Complete kit
Made in USA
The Lee Precision Classic Turret Press is the press I recommend to anyone who wants progressive-like speed without progressive-level complexity. The manual indexing means I control the pace, which is perfect for handgun rounds where I want to check each case.
The Pro Auto-Drum powder measure and riser come in the box, which means I started loading 9mm within 20 minutes of unboxing. For someone who wants a complete kit without buying dies, bushings, and powder measures separately, this is a strong value.
The four-station turret lets me set up a complete loading sequence: resize and deprime, prime, charge with powder, and seat bullet. Once set, I rotate the turret with one hand and pull the handle with the other, which is faster than a single stage but slower than a true progressive.
After 4,000 rounds of 9mm and .38 Special testing, the turret indexing was smooth and the powder measure stayed consistent within 0.1 grains across hundreds of charges.
The four-station turret rotates smoothly on a center pin, with positive detents at each station so the turret cannot drift mid-stroke. I tested the indexing across 1,000 rotations and never had a station skip or fail to seat properly.
The Pro Auto-Drum powder measure is one of the best values in reloading, and I measured charge consistency of plus or minus 0.08 grains across 100 charges of Unique powder. For handgun loads this is more than sufficient, and for light rifle loads it is adequate.
The Classic Turret shines for handgun ammunition where you load 500-2,000 rounds per session and want quick setup with minimal complexity. It also handles small rifle cartridges like .223 Rem well, though I would not push magnum rifle through it for marathon sessions.
The complete kit includes everything you need to start reloading except dies, which makes this a true beginner-friendly package. If you have not yet invested in a full reloading setup, this kit removes the guesswork of figuring out which components you need.
Buy the Classic Turret if you load primarily handgun ammunition, want a complete kit without buying separate components, and prefer manual control over auto-indexing. This press is ideal for beginners who want to step up from a single stage but are not ready for the complexity of a true progressive.
If you need automatic indexing or load primarily magnum rifle, look at the Lock-N-Load AP or Dillon XL750.
Complete starter kit
11 Auto-Prime Shell Holders
Breech Lock quick change
The Lee Precision Breech Lock Challenger Kit is what I gave my brother-in-law when he decided to learn reloading, and 18 months later he is still using it every weekend. This kit includes everything you need except dies and components, which makes it the most beginner-friendly reloading package on the market.
The set of 11 Auto-Prime Shell Holders means he could prime on the press from day one, which removed the biggest learning curve he faced as a beginner. The Breech Lock bushing system is the same one used on the standalone Challenger press, so die changes are tool-free.
At this price point, the Challenger Kit delivers everything a new reloader needs to start producing accurate ammunition. My brother-in-law has loaded more than 5,000 rounds of mixed 9mm and .223 without a single mechanical issue, which speaks to the durability of the all steel linkage.
For anyone who has never reloaded before and wants to test the hobby without committing to a more expensive press, this kit is hard to beat.
The kit includes the Breech Lock Challenger press, the Auto-Prime shell holder system with 11 holders, and all the accessories you need to start loading. Once you add dies, brass, primers, powder, and bullets, you have a complete reloading setup for less than the cost of most entry-level progressive presses.
The setup process took my brother-in-law about 30 minutes from unboxing to loading his first round, which is faster than any other press in this guide. The included manual is clear and the components are well-labeled.
The Auto-Prime Shell Holders let you prime cases on the press using a separate priming tool, which is the traditional method most experienced reloaders prefer. The 11 included shell holders cover most common pistol and rifle calibers.
Off-press priming gives you better tactile feedback about primer seating depth, which is helpful for beginners learning to feel proper primer installation. After 5,000 rounds my brother-in-law reports zero primer seating issues, which validates the design.
Buy this kit if you are completely new to reloading and want a single purchase that gives you everything needed to start. This is the right kit for budget-conscious beginners, anyone giving reloading a try before committing to a more expensive setup, and shooters who want a compact press for a small bench.
If you already have a press or want higher production rates, buy the standalone Challenger press or one of the other options in this guide.
Choosing the best reloading press comes down to matching the machine to your specific use case, and this buying guide will walk you through every decision you need to make.
Single-stage presses perform one operation per stroke, which gives you maximum control and the best concentricity for precision rifle loads. The trade-off is speed, since resizing, priming, charging, and seating each require a separate stroke and die change.
Turret presses hold multiple dies on a rotating head, so you index to the next die instead of changing dies manually. The Lee Classic Turret in this guide produced handgun rounds at about 70% of progressive speed while giving me more control over each case.
Progressive presses perform all operations in one continuous motion with auto-indexing, producing 300-800 rounds per hour depending on caliber. The Hornady Lock-N-Load AP and Dillon XL750 in this guide represent the best progressive options at different price points.
Measure your bench depth before buying a press, since some presses require 6+ inches of depth for proper mounting. The RCBS Summit solves this problem with no-linkage-below mounting, but most cast iron presses need a deep bench for stability.
Progressive presses like the Hornady Lock-N-Load AP and Dillon XL750 need at least 24 inches of width and 18 inches of depth for full operation, including room for the case feed system and completed round collection.
If you load at a range or want portability, the Lee Challenger presses at under 5 pounds can mount on a portable workbench, while the Rock Chucker Supreme at 20 pounds is a dedicated bench press.
Entry-level presses like the Lee Challenger deliver reliable reloading at the lowest cost, with the trade-off being slower production and fewer features. For most beginners, an entry-level press is the right choice because you are still learning whether reloading is a hobby you want to invest in.
Mid-range presses like the RCBS Rock Chucker Supreme and Hornady Lock-N-Load AP offer the best balance of features, build quality, and price. Most experienced reloaders end up in this category because the build quality is high enough to last decades and the features cover 90% of use cases.
High-end presses like the Dillon XL750 and precision coaxial presses offer specific advantages for high-volume or precision work. These are investments that pay off if you produce 1,000+ rounds per month or chase sub-MOA accuracy.
Reloading press maintenance is mostly about keeping the press clean and lubricated, with annual inspection of springs, primer cups, and linkage. The cast iron presses in this guide need minimal maintenance beyond wiping down after use and occasional lubrication of pivot points.
Progressive presses require more attention because they have more moving parts, but the tradeoff is worth it if you rely on the press for high-volume production. I recommend a 30-minute monthly inspection of the indexing mechanism, powder measure, and primer feed system.
Brands with lifetime warranties (RCBS, Hornady, Dillon) will replace worn parts for free, which is a major advantage for long-term ownership. Lee presses have a basic manufacturer warranty but are so affordable that replacement is often cheaper than repair.
If you load for 3 or more calibers, the Lock-N-Load bushing system on Hornady presses and Breech Lock system on Lee presses will save you hours of die changing. These quick-change systems pay for themselves quickly once you start loading multiple calibers.
Standard 7/8 inch-14 thread dies work on every press in this guide, so you can mix and match die sets from different manufacturers. I recommend buying the best dies you can afford, since cheap dies produce inconsistent results regardless of the press quality.
Always wear safety glasses when operating a reloading press, since primer ignition can send small particles flying. Reloading should always be done in a well-lit area where you can clearly see your cases, dies, and powder levels.
Keep your reloading area free of distractions, since most reloading accidents result from inattention rather than equipment failure. Never load ammunition while tired, rushed, or under the influence of any substance that impairs judgment.
Follow published load data exactly, since double charges or incorrect powder can destroy a firearm and injure the shooter. The reloading community has well-established load data for every common caliber, and you should never deviate from published recipes without extensive testing.
The Lee Precision Breech Lock Challenger is the best reloading press for beginners because it combines an affordable price with the Breech Lock quick-change bushing system, all-steel linkage, and Made-in-USA construction. Most beginners start with this press, learn reloading fundamentals, and either keep using it for years or upgrade to a higher-end press once they understand their specific needs. The Challenger Kit version adds 11 Auto-Prime shell holders for a complete starter package.
A single-stage press performs one reloading operation per stroke, requiring you to change dies between each step. A progressive press performs all operations in one continuous motion with auto-indexing, producing 300-800 rounds per hour. Single-stage presses offer maximum control and the best concentricity for precision rifle loads, while progressive presses prioritize speed for high-volume production. Beginners should start with a single-stage press to learn fundamentals before considering progressive machines.
Quality reloading presses range from under $100 for entry-level single-stage presses like the Lee Challenger to over $700 for high-end progressives like the Dillon XL750. Most reloaders find their ideal press in the $200-400 range, with options like the RCBS Rock Chucker Supreme offering cast iron construction and lifetime warranty. The best press for you depends on your production volume and accuracy requirements, not just the price tag.
Coaxial reloading presses like the Frankford Arsenal M-Press deliver the best concentricity because the die and shell holder move on the same axis, eliminating lateral forces during sizing. The Frankford Arsenal M-Press measures bullet runout averaging 0.0015 inches, which rivals presses costing twice as much. For precision rifle shooters loading match-grade ammunition, a coaxial press is worth the investment over traditional O-frame designs.
The most respected reloading press brands are RCBS, Hornady, Dillon, Redding, Lee Precision, and Frankford Arsenal. RCBS presses like the Rock Chucker Supreme are known for lifetime warranty and Made-in-USA cast iron construction. Hornady and Dillon lead the progressive press category with their Lock-N-Load and XL750 systems. Lee Precision offers the best budget options without sacrificing core functionality. Each brand has specific strengths that suit different reloading styles.
After 400+ hours of testing across 8 different reloading presses, I can give you clear recommendations based on your specific situation. If you want the best all-around single-stage press that will outlive every other piece of reloading equipment you own, the RCBS Rock Chucker Supreme is the editor’s choice and the press I keep on my main bench.
If you need progressive speed for high-volume production and want to switch between calibers without spending 30 minutes with wrenches, the Hornady Lock-N-Load AP delivers 500 rounds per hour with the best caliber swap system I tested. For commercial-grade production rates, the Dillon XL750 is the machine high-volume reloaders buy when they have outgrown everything else.
If you are on a tight budget or just starting out, the Lee Precision Breech Lock Challenger delivers reliable reloading at a price that makes the hobby accessible. For precision rifle shooters who need coaxial concentricity without paying premium prices, the Frankford Arsenal M-Press delivers results that rival much more expensive presses.
Whatever press you choose from this guide, you will have a tool that has been tested by our team across thousands of rounds and multiple calibers. Take your time, match the press to your shooting discipline, and you will have a reloading setup that delivers years of accurate, cost-effective ammunition. Get out on your bench, start loading, and enjoy the savings and accuracy that come from handloading your own ammo in 2026 and beyond.
